safety rules in design

safety rules in design:
what do i put here:

• my top 10 rules when using tools and materials.

minimum requirements:

• 15 lines
• a reflection of each rule
• 1 link
• 1 video
• biliography

Safety rules in design:

1. Use gloves when using Drill or Saw because you might slip and cut off or hurt your hand or arm.
2. where goggles when using things that can come back and hit you. because you might blind yourself.
3. have a safety lock on any blades. incase you slip and cut yourself.
4. look around you before swinging this that may be long. incase you hit someone.
5. have a mat or something under the drilled instrument or the hammering spot. incase you damage the table.
6. keep a strong grip on the saw or the hammer or drill. incase it slips out of your hand and falls.
7. dont leave long wires around. incase someone trips on them.
8. when your not using the electric cable un plug it. incase someone electrocutes themselves.
9. use goggles and gloves when using spray paint. incase you get spray paint in your eye.
10. clear the way when holding large object. incase you drop it and damage something.

http://www.5min.com/Video/How-to-Use-a-Drill-Safely-28172613= link

http://www.google.com/search?hl=en&client=safari&rls=en&tbs=vid%3A1&q=safety+while+using+a+drill&aq=f&aqi=&aql=&oq=&gs_rfai=